Wismec Noisy Cricket II-25 Mod
Buy Wismec Noisy Cricket II-25 Mod | Wismec | Mechanical Mods | Wismec | External Battery Mods
Noisy Cricket II-25, the updated version of Noisy Cricket MOD, is quite intelligent and multi-functional. Featuring the optional circuit in series and parallel, multiple circuit protection system are applied which make the device much safe and reliable. Moreover, two modes are available under circuit in series: direct output and constant voltage output. The simplicity and efficiency make Noisy Cricket 2 outstanding and popular.
Size (length x width x height): 48 x 25 x 87mm
Cell type: two high-rate 18650 cells, discharging current should be above 25A (NOT included)
Thread type: 510 spring loaded thread
It comes with
- 1 x WISMEC Noisy Cricket II-25 MOD
- 1 x warning card
- 1 x User manual
- 510 thread. Compatible with most 510 thread cartomizers/tanks.
- It doesn't include any 18650 battery cell. Please use cells with discharge current above 25A.
Updated version of Noisy Cricket MOD
Optional circuit in series and parallel
Alternative operating mode
Multiple circuit protection systems
Replaceable 18650 cells
Unique design of adjustable voltage
Battery display function
Power On/Off: Push the bottom cover and take it away, put two cells into the battery body. Press the fire button 5 times in quick succession, the button light will flash 5 times to indicate that it is ready for use. In the same way, it can be turned off after 5 seconds.
Vaping: Long press the button to take a puff.
Battery Display Function: The button light will stay lit or flash slowly when the battery quantity is high. On the contrary, the light will flash frequently.
|Battery Quantity||Light condition|
|60% - 100%||Stay lit|
|30% - 59%||Flash slowly|
|10% - 29%||Flash moderately|
|0 - 9%||Flash frequently|
Charging: Please take out the cells and charge through external charger.
Alternative Operating Mode: Under Cells in Series Circuit Condition, two modes are available: Direct Output mode and Constant Voltage Output mode. When powered off, long press the fire button for about 5 seconds to shift between direct output mode (white light) and constant voltage output mode (orange light). Release the button to choose the current mode.
Voltage adjustment: By rotating the voltage regulating switch under series circuit condition, the output voltage can be adjusted from 2V to 6V.